Description
Scope of supply:
- 4x Haier indoor unit Pearl 2.5 kW R32 incl. IR remote control AS25PBAHRA
- 1x Haier outdoor unit Multi-split 10.5 kW for 5 indoor units R32 5U105S2SS3FA
This product falls under the European F-gas regulation and commissioning may only be carried out by an F-gas certified company.
Do you not yet have an F-gas certificate? to start your training, which will allow you to install both single and multi-split systems as well as other heat pumps.
Are you already certified and experienced? Then scroll further down for more information and materials to get the job done or make your own choice from our complete range .
Features of the Pearl:
WiFi standard with hOn Smart Home App
Download the Haier App on an Apple or Android device and connect the equipment to your device to control your system wherever you are and at any time.
Voice control
Hands-free voice control function for Google Assistant or Amazon Alexa compatible Haier smart air conditioners.
Self Clean
The Self-Clean technology freezes the surface of the evaporator with the humidity from the air and removes the contamination from the evaporator during defrosting via the condensation drain. This keeps the evaporator and the air clean.
56°C Steri-Clean
This function kills bacteria and viruses by heating the evaporator to 56°C for 30 minutes.
UVC Sterilization
The indoor unit has a UVC lamp that sterilizes the air that blows through the indoor unit into the room by up to 99.9% and eliminates viruses in both their DNA and RNA.
3M filter Optional
The strong electrostatic charge on the filter surface removes harmful microparticles, including dust, viruses and bacteria, to ensure a healthier air environment.
Bluefin coating
Promotes condensation water drainage thanks to its hydrophilic and corrosive properties.
Dry
Automatically adjusts fan speed based on sensed temperature for more or less dehumidification.
Simple clip
For easy installation and mounting behind the indoor unit.
Self-diagnosis
Shows the error code on the LED display of the indoor unit.
Automatic restart
Automatically starts up in the same mode after a power failure.
Automatic mode
Automatically switches between cooling and heating.
Super Match
Many combination options of indoor and outdoor units.
>
LED display
Shows the room temperature or the desired temperature on the panel.
Sleep function
Provides maximum comfort and energy savings for worry-free sleep.
Fan with 5 settings
Operates at five different air speeds to give users more choice.
Quiet
Low noise level thanks to the optimized design of the fan, air ducts and motor.
DC motor
Ensures reliable operation with higher energy savings and lower noise levels.
1W standby
Reduces standby consumption from 8W to 1W by optimizing the control program.
Standby 3 min.
Helps prevent unexpected damage to the compressor and thus ensures a longer lifespan.
Automatic defrosting
Activates when necessary to waste less energy and provide better comfort by reducing defrost time
Intelligent air
This function automatically operates the louvers to better distribute the airflow based on the mode you have set.
Automatic vertical airflow
Moves vertically and works with horizontal slats to distribute airflow throughout the room.
Coanda Plus
The special aerodynamics of the slats push the air flows from the indoor unit further and more powerfully without having a negative effect on the noise level, efficiency or air flow.
Flow+
The indoor unit has been improved thanks to the special motor, fan and optimized air ducts, allowing up to 20 meters of air throw.
Inverter Plus
Compared to traditional Inverter technology, Haier Inverter Plus technology with TLFM, PID and A-Pam delivers even better air conditioner control, with maximum comfort, reliability and efficient performance.
6 speed outdoor unit
The condenser fan continuously controls the ambient sensor and the block sensor to optimize performance and increase energy efficiency.
Turbo cooling
The special control program allows the motor to operate at a higher frequency and users can enjoy a cooler environment in a much shorter time
Hot start
When the unit operates in heating mode or switches from cooling to heating, it does not blow out cold air.
-15°C heating
Heating possible up to an outside temperature of -15 °C.
-10°C cooling
Cooling possible up to an outside temperature of -10 °C.
PID inverter control
Optimizes the operating frequency before the desired temperature is reached and makes continuous adjustments to maintain the room temperature at the desired temperature.
10°C keep warm function
This is activated when the room temperature drops below 10 °C to protect pipes in unoccupied holiday homes, garages and cellars during the winter period.
Capacity data
- Cooling capacity nom. (min. - max.): 10.0 (1.5 - 11.5) kW
- Heating capacity nom. (min. - max.): 10.5 (4.4 - 12.0) kW
- Power consumption - cooling nom. (min.-max.): 2.76 kW
- Power consumption - heating nom. (min.-max.): 2.73 kW
- Return EER: 2.88
- Efficiency COP: 3.7
- Pdesign - cooling capacity (35°): 10 kW
- Pdesign - heating capacity (-10 °): 8.0 kW
- Seasonal Efficiency SEER: 7.0 (A++)
- Seasonal efficiency SCOP: 4.0 (A+)
- Annual energy consumption - cooling kWh/y: 537
- Annual energy consumption - heating kWh/y: 2889
Indoor unit
- Power supply: 1/220-240/50 Ph/V/Hz
- Air flow: max. 550 m3/h
- Dehumidification: 1.0 l/h
- Sound power level - cooling: 54 dB
- Sound power level - heating: 54 dB
- Sound pressure level - cooling: 37/32/28/18 dB(A)
- Sound pressure level - heating: 37/32/28/18 dB(A)
- Net dimensions: WxDxH 805x200x290 mm
- Net weight: 8.0 kg
Outdoor unit
- Power supply: 1/220-240/50 Ph/V/Hz
- Air flow rate Hi: 4200 m3/h
- Sound power level: 71 dB
- Sound pressure level: 55 dB(A)
- Net dimensions WxDxH: 920x760x372 mm
- Net weight: 66 kg
- Compressor type: Double rotary inverter
- Compressor brand: Mitsubishi
Technical data
- Maximum number of indoor units: 5
- Refrigerant: R32
- Liquid line diameter: 5x6.35 mm (inch)
- Gas side diameter: 3x9.52 (3/8") + 1x12.7 (1/2") mm (inch)
- Total maximum pipe length: 80 m
- Maximum pipe length single: 25 m
- Pipe length without top-up: 40 m
- Max. height difference IU/OU: 15 m
- Max. height difference IU/IU: 7.5 m
- R32 refrigerant charge: 2.4 kg
- Refrigerant charge: 1.62 tCO2Eq
- Top-up R32: 20 g/m
- Operating range - cooling min. - max.: -10 - 46 °C
- Operating range - heating min. - max.: -15-24°C